notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 the big deal ? ultra wide frequency range, 30 mhz to 8.2 ghz ? high cw input power, +32 dbm ? ultra reliable ceramic hermetic package ? low profle case, 0.045 high product overview the CLM-83-2W+ protects against esd and input rf power surges, up to 1.6 w, across a very wide fre - quency range. internal diodes are bonded to a multilayer integrated ltcc substrate, and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated covers and eutectic ausn solder. these rugged, tiny limiters, only 0.12 x 0.12 x 0.045 high, provide excellent protection for low noise amplifers and other sensitive equipment, especially in hostile environments where unwanted signals prevail, such as manufacturing sites, train tunnels, ecm & eccm, etc. feature advantages limiting abilities from +12 to +32 dbm protects against very strong undesired signals to help prevent burn out of amplifers and other highly sensitive components ultra wideband, 30 mhz to 8.2 ghz protects against many different types of unwanted signals. tiny surface\mount package useful in crowded pcb boards where space is at a premium ceramic, hermetic, nitrogen\flled construction protects against moisture, for long\term reliability response time 2 nsec reacts almost instantaneously to limit unwanted high\level signals recovery time 8 nsec minimal downtime after unwanted signals are removed, with very quick restoration of standard operating levels low insertion loss and vswr provides minimal degradation to system performance, especially low noise amplifers where input loss is critical low cost practical, low\cost solution to protect expensive amplifers or other sensitive applications from burning out CLM-83-2W+ key features 50 ? broadband 30 to 8200 mhz case style: dl1721 +12 to +32 dbm limiter
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 function pad number description rf in 2 rf input pad rf-out 7 rf output pad gnd 1,3,4,5,6,8, bottom center paddle connected to ground. CLM-83-2W+ case style: dl1721 product features ? wideband, 30 to 8200 mhz ? low insertion loss 0.5 db typ. ? fast recovery time, 10nsec typ. ? excellent vswr 1.2:1 typ. ? low output power, 11.5 dbm typ. ? ceramic, hermetic, nitrogen flled rev. c m155058 CLM-83-2W+ dj/cp/am 160222 typical applications ? military, hi-rel applications ? stabilizing generator outputs ? reducing amplitude variations ? protects low noise amplifers and other devices from esd or input power damage 50 ? broadband 30 to 8200 mhz general description the CLM-83-2W+ is an rohs-compliant limiter utilizing pin diodes on an ltcc substrate, all hermetically sealed under a controlled nitrogen atmosphere. terminal fnish on the tiny, low-profle case is ni-pd-au, delivering excellent electrical performance across a very wide bandwidth, with low insertion loss, excellent return loss, and low output power. pad description +12 to +32 dbm limiter +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 4 absolute maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c rf input power 2w permanent damage may occur if any of these limits are exceeded. electrical specifcations at 25c CLM-83-2W+ parameter condition min . typ. max. units frequency range 30 8200 mhz linear range max input power less than 0.1 db compression 2 dbm insertion loss less than +2 dbm input power 0.5 1.3 db vswr less than +2 dbm input power 1.2 1.6 :1 limiting range input power >1db compression fltered signal frequency +12 +32 dbm output power +11.5 dbm output/ 1db input input power range (dbm) db/db 12 to 20 0.4 20 to 25 0.2 25 to 32 0.8 recovery time 1 watt pulse, 50 sec pw, 1khz duty cycle, recovery to within 90% of fnal value 10 nsec response time 30 dbm input, 50 sec pw, 1 khz duty cycle 2 nsec limiter notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 4 of 4 CLM-83-2W+ characterization test circuit performance data data table swept graphs case style dl1721 ceramic package, exposed paddle, terminal fnish: ni,pd,au tape & reel f66-1 standard quantities available on reel 7 reels with 10, 20, 50, 100, 200, 500 or 1k, 2k devices. suggested layout for pcb design pl-377 evaluation board tb-679+ environmental ratings env-67 additional detailed technical information additional information is available on our dash board. to access this information click here esd rating human body model (hbm): class 3b (>8000v) in accordance with jesd22-a114 machine model (mm): class c (>400) in accordance with jesd22-a115 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d mcl clm-83 + yyww product marking fig. 1. block diagram of test circuit used for characterization. mini-circuits test board tb-679+. insertion loss, return loss, and vswr measured using agilent n5230a network analyzer. performance at frequencies below 30 mhz may be improved by increasing capacitance at c1 and c2. depending on application requirements, this device may be effective at frequencies up to 10 ghz. conditions: 1. frequency range tested: 1 to 10000 mhz 2. rf input power tested: -12 to +33 dbm limiter notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
